GUNSMITH

---

We have on site gunsmiths who are some of the best in the industry. Whether you need to fix an old firearm, repair a broken firearm, want to add scopes and accessories to your favorite firearm, or have firearm that needs a thorough cleaning, we can help!  Call ahead or stop by to ask for availability! 

• Hourly rate: $70, minimum shop charge of $35
• Estimates: $25 (applies towards final bill)
• Factory work firearm shipping $35 (if firearm needs to be sent to manufacturer)
• Final bills are calculated with shop time plus cost of parts

Laser Engraving

• NFA marking  (6 words)  $55
• Pre drawn artwork $40
• Deep engrave add $50
• Custom art work add $100 set up

Handgun work

• Revolver Action (+parts): $75
• 1911 Action (+parts): $75
• Glock Action (+parts): $35
• XD Action (+parts): $70
• M&P Action (+parts): $70

AR Work

• AR 4-4.5# Trigger (with factory parts): $70
• AR Free Float Tube replacement (+parts): $70

BOLT ACTION Work

• Trigger tune and adjust (with factory parts): $70
• Trigger replacement ( plus trigger ) $50
• Barrel Threading $125.  hourly rate will apply for odd or complex set-up for threading.  
• Chamber and thread $350. This does not include cost of barrel or custom reamer.
• True/Blueprint action $300

Sight Work

• Sight purchased at Salt Fork Armory: NO CHARGE
• Mount & Bore Sight Scope(not purchased at SFA): $35
• Install Night Sights (1911 staked): $30
• Bore Sight Scope: $10

Sight In Packages*

• Professionally mount your optic (if needed)
• Complete sight in process at YOUR preferred distance by actually shooting your firearm
• Cost: $50

Detail Cleaning

• Thorough Cleaning
• Inspect to ensure good working condition
• Oil as need
• Cosmoline Removal 
  • Excessive rust may result in additional charge
• Starting at $70

*Ammo not included, $10 additional fee for magnum calibers

Firearm refinishing and coating

Metal parts will be coated with Moly/Teflon, CeraKote, Heat activated baked on finish or DuraCoat air dry finish. Polymer, Fiberglass, Scopes or Wood will be coated with DuraCoat or Alumahyde II air dry finish. The colors are mixed to match as close as possible but there can be variations in finish color or sheen if different products are used on the same firearm.

Disassembly / Reassembly Is always on top of the coating prices. It usually ranges between $25 – $75 depending on the Gun and difficulty.  
Call for accurate pricing of guns not broken down.

Are you the world’s worst procrastinator? Good news if you are.
We have just added rush service.
6-14 day service add 15%
5 day service add 25%
3-5 day service add 50%
Next day service add 100%

HANDGUN / PISTOL COATING PRICING:

Slide Only – One Color (stripped) $65.00
Frame Only – One Color (stripped) $65.00

Complete Handgun  – One Color $150.00
Complete Handgun  – Two Colors $175.00
Complete Handgun – Three Color $210.00
Complete – Custom design up to 3 color  $250.00 + Add stenciled charge below
Broken down Slide and Frame same color – $125.00
Broken down Slide and Frame different colors – See slide and frame price at top
Add Camo pattern (Three colors) $65.00
Slide only most design’s including flag – $100.00
Distress Add- $40.00

Accessories or extras for Pistols
Coat Pistol Magazines – Each (must be one of the colors on gun) $15
Coat Pistol Magazine – Separate Color $20
Hardware Only – $25.00
Add Clear ( Hi-Gloss or Matte )- $35.00

Sur charges that may get affect pricing on certain designs
Stenciling work – $15.00 Surcharge
Extreme Detail Stencil work – $50.00 Surcharge

AR TYPE RIFLE & SHOTGUN COATING PRICING:
 

Autoloading – AR-15/M4 or AK
Complete Gun: Upper and Lower Receivers, Barrel, Handguard, Pistol Grip, Pins, and Controls
Also includes up to 2 mags One color.
One Color $210.00
Two Colors $235.00
AR-10 and Variants Surcharge – add to AR-15 pricing $50.00
FN-FAL and HK-G3/G33, etc Surcharge – add to AR-15 pricing $50.00

Pieces Only
Shotgun Metal Only $165.00
AR Upper and Lower Receivers Only – One Color (Stripped) $125.00
Upper Only or Lower Only – $65.00
AR Upper and Lower Receivers Only – up to 4 color camo + Stencil charge  (Stripped) – $250.00+
Upper / Lower / and Handrail One Color – $175.00
AR10 Upper/Lower/ and Handrail One Color – $200.00
Upper/ Lower/ Handrail – up to 4 color camo ( Stripped) – $350.00+
Forearm only – Rail Type (One Color) $65.00
Forearm only – Picatinny Quad Rail (One Color) $75.00

Camo type designs
Three Color Camouflage Pattern $375.00
Four Color Camouflage Patterns $400.00
Five Color Camouflage Patterns $425.00
Coat 20/30rd AR Magazines camo (each) $35.00

Scopes And Scope accessories
Scope Mounts (One Color) $30.00
Scopes Standard – One Color C-Series $60.00
Scopes Target and Tactical –  (Includes masking of dials, etc) $85.00
Scopes Target and Tactical – Camouflage (costs may vary – call for quote) $125 – $250

Accessories
Barrel – one color $70.00
2 Color Fluted Barrel – $100.00
Stock: Standard A2 or M4 (One Color) $50.00
Stock: Target Adjustable (MagPul, etc) One Color $75.00
Bipod – Broken down (One Color) $50.00
Bipod – break down and reassembly – $50.00
Magazines – $20.00 each one color Minimum of 3
Pins / Action bits and parts only – $50.00
Extra Color Charges for Accessories (Each Color) $15.00

Bolt Action Rifle COATING PRICING

Rem 700 and similar – One Color – $195.00 – Does not include Bolt
Bolt Action and Tactical 2nd Color surcharge – add $30.00
Bolt Action and Tactical – Three Color Camouflage Surcharge – add $75.00 to the 2nd color surcharge
Bolt Action and Tactical – Camouflage Four and Five Color Patterns – Surcharge (add to one color base price) $125.00

All metal including bolt – $175.00 – One color
Barreled Action Only – $125.00 – One color
Stock only – $100.00 – One color
Large Tactical Adjustable type stocks – $145.00 – one color
Large Tactical Adjustable type stocks – $210.00 – Camo  up to 3 colors

Parts
Coat Bolt to match – $35.00
Coat bolt handle and Polish bolt – $50.00
With Adjustable Tactical Stocks – Surcharge: add to above $25.00
Bolt Action Rifle Magazines – One Color $20.00
Bolt Action Rifle Magazines – Each Additional Color $10.00

Extra Large Bolt action type Firearms
50 BMG Bolt Action Rifles – One Color $350.00
50 BMG Rifles Additional Colors – Each color, add $100.00
AR-30 and similar .338 Lapua and .408 CheyTac bolt action rifles – one color $275.00
Barrett 82A1 and similar semi-auto 50BMG rifles – One Color $500.00
Barrett 82A1 Magazines, ea – One Color $35.00
Barrett and 50 BMG Magazines – Additional Colors, each: $10.00
Four and Five Color Camouflage Patterns – Surcharge for .338 Lapua Tactical and 50 BMG rifles: – $250.00

SPECIAL WEAPONS: 

Suppressor – $65.00
M249, M240, Etc: CALL
Edged Weapons: CALL

CUSTOM MACHINING PRICES:

Pistol Slide RMR Install  –  $175.00 +
Slide Front Cocking Serrations  –  $ 120.00 +
Slide Porting – $120.00 +

LASER ENGRAVING

We offer full service laser engraving on most anything you have
Prices for Laser engraving are as follows:

NFA Laser Engraving – 55.00
Logo Laser Engraving – Depends on the difficulty of the logo Please call for quote

 

TOLERANCE: For standard firearms applications it is often inadvisable to coat both pins and pin holes, as the resulting one (1) mil thickness of the coating when applied to rounded surfaces creates increase of two (2) mil to the part tolerance and four (4) mil (.004) when both hole and pin are coated. This is also applicable to auto-pistol slide and frame fit, such as on tight-fitting 1911’s. We typically plug or mask holes and pins and only coat the pin ends. However, we can coat pins and holes and then custom fit these parts after coating for an additional charge. We recommend hand fitting and lapping for 1911 pistol slides and frames as this will yield a precision fit and can help to tighten looser fitting slide/frame combos.

MARKINGS: For receivers, frames, slides, Picatinny rails which have painted on or lightly laser etched markings these markings will be lost during the surface preparation and coating unless they are machine engraved or stamped. If these markings are of great importance we can mask over them, but those areas in and immediately around the markings will not be coated and, as such, will not blend. Manufacturer’s serial numbers will be masked at no additional charge where needed or coated where possible. Some manufacturer model numbers, name etc which are laser engraved will be masked over. This is per BATFE (ATF) regulations. Please consult us for specific requirements.